Direct solar pumping system type C 15 / 1 with the solar module

The solar pumps are designed for direct connection to a solar module array.
It operates with an integrated control electronics, highly efficient, even under an overcast sky and simultaneously monitor the water level of the hole.
In combination with a powerful solar generator a robust and extremely low-maintenance system is created for all areas in which an independent and continuous water supply is needed.
If the solar generator at dawn sufficient power when needed, the pump starts pumping water and increases the flow rate similar to the incident solar radiation.
The produced water can be stored in a tank and is continuously available, even when the pump stops automatically at sunset the promotion.

Delivery:
Solar powered water pump end sub type C 15
12-m solar pump cable 4x2, 5 mm, suitable for potable water
brushless DC motor that is not filled with water in the engine electronics, pressure-balanced IP 68
immersion unlimited
Stainless steel, pump outlet 1 1 / 2 Z.
max. Delivery at
about 2 m head about 3072 liters per hour
about 5 m head about 2736 liters per hour
approximately 10 m head about 2375 liters per hour
Length 535 mm x 100 mm
Weight 12 kg (without cable)

Pump Controller Pump
VDC / Housing IP 54, dust-and splash-proof
Control and monitoring of the pump system and display the operating states, installed above ground, no parts under water two inputs: dry run protection and float switch as overflow protection (option) Dry-running protection with 12 m cable.
Dimensions LxWxH 248x225x108 mm
Bracket for controller with main switch
for mounting on-site pipe mast diameter 76.1 mm

Special solar generator
49V/132WP crystalline mono-poly /
Dimensions: H approx 145 cm x W 64 cm, kg, depending on the type of solar module, with 2 m connection cable UVstabilem weight 15


Solar generator, pump, controller, solar module couplers and cable pre-equipped plug-in and checked during the test run


Optional extras:
Solar generator mounting for fixing to steel plate pipe mast Ø = 76.1 mm 2 ½-inch tilting and swiveling, adjustable quick, easy assembly weight, 40 kg