Solar pumping system for streams, drinking water supply, livestock watering, etc. Suitable from 0-100 m head
She works with an integrated electronic control system with high efficiency even in overcast weather and simultaneously monitor the water level of the well.
In combination with a powerful solar generator a robust and extremely low-maintenance system is created for all areas in which an independent and continuous water supply is needed.
If the solar array at dawn sufficient power when needed, the pump starts pumping water and increases the flow similar to the incident solar radiation.
The pumped water can be stored in a high tank and is continuously available, even when the pump stops automatically at sunset the promotion.
Delivery:
Solar-operated water pump, type SO-HR03 / 2
100 m solar pump cable 4x6, 0 mm suitable for potable water
brushless DC motor
no electronics in the engine
water-filled, IP 68
pressure balanced
immersion unlimited
Stainless steel
Pump outlet 1 1 / 4 inch
max. Flow rate 0.5 m³ / hr
Pump Controller Pump
VDC / IP 54 housing
dust-and splash-proof
Control and monitoring of the pump system and display the operating states
installed above ground
no parts under water
2 inputs: dry run protection and float switch as overflow protection (optional)
Dry-running protection with 18 m cable
Dimensions LxWxH 248x225x108 mm
Special solar generator 49 V / 350 Wp poly / mono-crystalline
Dimensions: H approx 160 cm x W 160 cm, depending on the type of solar module
2 m with UV-resistant cable
Weight 36 kg
Bracket for controller with main switch for mounting on-site pipe mast 76.1 mm diameter
Output
at 60 m head 3-3.5 m / day
at 80 m head about 2.6 to 3.0 m³ / day
at 100 m head about 1.8 to 2.1 m³ / day
Solar generator, pump, controller, and solar Modulkoppler cable pre-equipped plug-in and checked during the test




