The independent solar lighting works automatically and independently from the main grid. The installation at the site is easy to perform, since cabling work is required.
Self-sufficient solar lighting system - no electricity costs - environmentally friendly lighting in 2 directions
From the motion sensor turns the lights on automatically when motion is detected.
The sensor with adjustable sensitivity detects both heat and movement.
Two LED lamp with special optics ensure outstanding brightness, which corresponds approximately to the luminosity of a 20 W halogen lamp.
LEDs have many advantages over halogen lamps, for example, extremely long life (100,000)
Very high shock and vibration resistance, low power, no inrush and low operating temperature.
By a powerful solar panel during the day, the maintenance-free solar battery with high capacity will be charged.
You can hold enough power to light about 3 weeks supply in normal operation (fifteen 1-minute cycles per night), without additional sun exposure is required.
Self-sufficient illumination requires no Netzanschluss.Verkabelungsarbeiten account at the site. It can also create lighting that in case of power supply would be unprofitable or impossible. There will be no ongoing costs for energy consumption, operation or maintenance
Purpose:
Walking and cycling
Staircases
Parks and campsites
Bus stops and waiting homes
Parks and bridges u.v.m.
Advantages:
Specifications / Scope of Supply
Maintenance-free solar unit in the Energy box
Galvanized bracket, very stable, rotating,
High-performance solar cell 12V / 20W
Gel solar battery 12V/18 Ah C 100/216 Wh maintenance free, leakproof
2 spot with 5-W Power LEDs and motion detector
Charging socket to recharge the battery
Motion-detection area 120 °
Reach about 10 m depending on mounting height, adjustable
Timed 1 minute
Twilight switch about 5000-1000 lux, adjustable
Polycarbonate housing
Dimensions WxHxD 615x280x120 mm
Weight 12 kg
Easy installation, suitable for customer's tubular mast 2 inches (60 mm) Ø/H2500-3000 mm
Self-sufficient solar lighting system - no electricity costs - environmentally friendly lighting in 2 directions
From the motion sensor turns the lights on automatically when motion is detected.
The sensor with adjustable sensitivity detects both heat and movement.
Two LED lamp with special optics ensure outstanding brightness, which corresponds approximately to the luminosity of a 20 W halogen lamp.
LEDs have many advantages over halogen lamps, for example, extremely long life (100,000)
Very high shock and vibration resistance, low power, no inrush and low operating temperature.
By a powerful solar panel during the day, the maintenance-free solar battery with high capacity will be charged.
You can hold enough power to light about 3 weeks supply in normal operation (fifteen 1-minute cycles per night), without additional sun exposure is required.
Self-sufficient illumination requires no Netzanschluss.Verkabelungsarbeiten account at the site. It can also create lighting that in case of power supply would be unprofitable or impossible. There will be no ongoing costs for energy consumption, operation or maintenance
Purpose:
Walking and cycling
Staircases
Parks and campsites
Bus stops and waiting homes
Parks and bridges u.v.m.
Advantages:
Specifications / Scope of Supply
Maintenance-free solar unit in the Energy box
Galvanized bracket, very stable, rotating,
High-performance solar cell 12V / 20W
Gel solar battery 12V/18 Ah C 100/216 Wh maintenance free, leakproof
2 spot with 5-W Power LEDs and motion detector
Charging socket to recharge the battery
Motion-detection area 120 °
Reach about 10 m depending on mounting height, adjustable
Timed 1 minute
Twilight switch about 5000-1000 lux, adjustable
Polycarbonate housing
Dimensions WxHxD 615x280x120 mm
Weight 12 kg
Easy installation, suitable for customer's tubular mast 2 inches (60 mm) Ø/H2500-3000 mm
Recommended products:
 |
Solar Lighting Luna Self-sufficient solar power system693,77 EUR (19 % VAT incl. excl. Shipping costs) |
